Home : Get Started : Laminate Options

Laminate Options

This page displays the complete selection of laminate type and color options available from IAC. Each Series of products, however, may offer only a subset of these laminates. The laminate type and colors available for a specific series is accessed by selecting the the Laminate Selection button within the online product pages for that series.

Due to monitor and printer color discrepancies, some color swatches represented here may not accurately match true laminate color and texture. Please consult with an IAC representative to see actual laminate samples if color is critical.

Standard Worksurface Laminates

• IAC uses only high pressure postforming horizontal grade laminates.
• All laminates are chemical resistant and complay with federal specifications governing impact, abrasion and chemical resistance (FED Spec-L-P-508H).
• Chemical resistant and Laboratory Grade Laminates are available, please consult the factory.

---

ESD Worksurface Laminates

• Resistant measurements are used to establish the charge draining capacity of dissipative hard laminate.
• All worksurfaces are tested for resistivity
• Surface to ground testing R (ohms): 1x106 minimum 1x109 maximum.
• Surface to surface testing R (ohms): 1x106 minimum 1x109 maximum.

---

Trim & Accent Laminates

Trim and Accent color laminate must be specified when ordering Dimension 4 uprights, Pro Series, rolling carts, MAS and SAS, and Airclean Workstations.

Workstation Specifications:

• All worksurfaces are laminated over 1-3/16" industrial grade particle board.
• Worksurfaces, when laminated, are impact resistant.
• Worksurfaces have pre-drilled metal inserts for ease of assembly.
• All worksurfaces include 180 degree rolled front edge.
• All ESD worksurfaces include an ESD grounding kit.

Notes:

1. The first two groups of laminates are for worksurface applications.
2. The third group of laminates is used for accent color on those workstations that feature this option.