|
Modular Vertical Flow Workstation
|
MVF Modular Workstations are designed to fit between the vertical uprights of the Dimension 4 workstations. They can be used individually, run in continuous rows, or grouped to form clean islands.
The width of the unit is based on 24" wide filters and light tubes. Prices include a clear vinyl non-ESD curtain that is attached with velcro and wraps the sides and back of the unit. Also available with ESD option, please consult IAC with your specifications.
The MVF includes clear vinyl curtains, magnehelic gauge, and variable speed fan control. The gel seal type filters make replacement easy. Recommended for any class 100 requirement that does not produce by-products that contaminate the worker or the production area. They assemble quickly and are suspended over the Dimension 4 worksurface.
Modular Design: Transforms existing vertical upright workbenches into clean air stations.
Construction: Welded cold rolled steel, combines strong, long-lasting service with attractive low-profile design.
Fans: Are reverse curve impeller type, direct drive and balanced with static capacity up to 1.2 inches W.G. at rated flow. They are engineered to operate in their most efficient range for quiet, stable performance. Noise levels do not exceed 65 DBA.
HEPA Filters: Are 99.995% DOP efficient on particles 0.3 micron and larger. Filters are replaceable.
Variable Speed Control: Is installed in the right hand side of the front fan housing for airflow adjustment, to prolong filter life.
Magnehelic Gauge: Measures the static pressure built up in the air plenum as the HEPA filter loads up with particles. This gauge tells the operator or maintenance personnel to either adjust the air velocity or replace the filter.
Electrical Requirements: 115 volt, single phase, 60 Hz standard, 15 amp.
Color: Baked-on powder paint gloss standard. Customer specified, please reference paint card for color options.
Fluorescent Lighting: Provides a minimum of 100 foot-candles at the worksurface. Unit is four tube, double pin rapid start. 24? tubes required. (fluorescent tubes not included.)
Trim: Customer specified, please reference laminate card for color options.
Mounting: Mounts to Dimension 4 benches. Special benches are not required resulting in substantial savings.
Air Velocity: Averages 90 FPM ± 20%. This average is the sum of readings taken in a 1-foot grid pattern across the filter face at a distance of 6 inches.
Easy Access Prefilters: Are 1-inch throw-away fiberglass.
Switches: For the lights and fans are located at the right hand face of the fan/filter cabinet.
Shipping: Product shipped assembled and semi-crated.
(For more information on retrofitting to other bench types please consult IAC Industries.) The recommended distance between the worksurface and the underside of the unit is 36".
|
Length
|
Part Number
|
RFQ
|
|
45.75"
|
MVF-424
|
|
|
57.75"
|
MVF-524
|
|
|
69.75"
|
MVF-624
|
|
|
|
|
Industrial Workbenches
