IAC Industries manufactures light fixtures for a wide variety of lighting conditions designed to fit most application requirements. Having the correct light at an industrial workbench is as important as the light itself. For this reason IAC offers standard output two-tube fixtures, high output two-tube fixtures, and three-tube fixtures. Each fixture is available in three different diffuser types: standard prismatic, egg crate Direct Overhead Light–(DOL) and parabolic. Each is designed to condition the light to suit the environment and application. All light fixtures supplied by IAC are UL Listed.

Standard Fixtures
The standard output fixture with the prismatic diffuser is most useful when in environments with good ambient light and when the application requires 100 to 110 foot candles of cool light. The DOL egg crate diffuser in this fixture will direct the light more vertically toward the worksurface than the prismatic diffuser. A parabolic diffuser will direct the light vertically even more toward the industrial workbench than the DOL diffuser. There is approximately 11% foot candle drop with the parabolic diffuser.

High Output Fixtures
The two-tube high output fixture increases the foot candle output approximately 20% depending on the diffuser selected. These high output light fixtures will make up for environments with low ambient light levels.

3-tube Fixtures
The three-tube fixture allows the operator to control all three tubes so that one, two or all three light tubes can be turned on or off. These light fixtures will produce up to 195 foot candles of light depending on the selected diffuser.

MTS LT style light fixtures are UL Listed and include an 8 ft. power cord with an on/off switch wired in. These light fixtures are available for the MTS vertical support system and are angle adjustable, adjustable up and down in 1 increments, and adjustable in and out on the horizontal support brackets. MTS light fixtures feature wrap around prismatic diffusers and produce approximately 100 foot candles of light depending on the environment’s ambient light.

MTS Deluxe light fixtures are manufactured by IAC and match Dimension 4 light fixtures for features and tube usage.

If the bench you are selecting the light fixture for has SES or PDS be sure to select the fixture with the correct cord length.

Measure the ambient light where the new light fixture will be installed. This will help you select the fixture with the correct foot candle output rating. Be sure to select a light fixture that will tilt if glare at the workstation is an issue. This will allow the operator to tilt the fixture to direct the light away.