 |
360° - Workmaster™ Storage Cabinet
A 360° view of the Workmaster™ Storage Cabinet Workbench.
Run time: 23 seconds.
 |
 |
Massive Storage |
| |
Almost 30” wide, the WSC pedestals
deliver nearly double the storage of standard workbench pedestals. |
| |
|
|
Built for the Big Jobs |
| |
These benches support static loads
up to 1000 lbs on a choice of worksurfaces that include standard or
ESD plastic laminates, stainless steel, and maple block. |
| |
|
|
|
Drawer Envy |
| |
3”, 6” and 12”
drawer heights to choose from. All feature genuine Accuride™
steel ball bearing slides that extend 95% of full drawer depth. |
| |
|
|
Choose Your Configuration |
| |
Nine drawer configurations. Three
overall bench lengths and two surface depths. Two worksurface heights.
|
| |
|
|
IAC Industries answers the perpetual
question, “Where do I put all this stuff?” with the new Workmaster™
Storage Cabinet Workbenches.
These units offer wide, large capacity drawer pedestals supporting a variety
of worksurface options that include laminates, maple block and stainless
steel. The main feature of this bench is the extra storage capacity that
the cabinets give the you. It's rugged, sturdy and with the use of optional
accessories can become an entire work-center with added storage capacity.
|
Get Organized with Big Drawers
 |
Three drawer heights: 3",
6" and 12" |
|
Nine (9) Drawer configurations |
|
Weight capacity, 100 lbs per drawer using
Accuride® full ball-bearing, 95% extension drawer slides |
|
Drawer dividers sold separately. Drawers
may be divided into (48) 3x3 "pockets" or (12) 6x6 "pockets" |
|
Two black recessed handles in each drawer |
|
Optional ribbed rubber mat for drawer
bottom. Stops small parts/tools from rolling around in the drawer |
|
Optional label holder available |
|
| Have It Your Way… |
 |
 |
|
Lengths: 60", 72" and 96" |
|
Depths: 30" and 36" |
|
Two overall heights: 33" and 36" |
|
Order benches by components (Cabinet(s), leg,
work surface) so you can build it "your way" |
|
Worksurfaces are pre-drilled |
|
Supports a 1,000 lbs distributed static load |
 |
 |
Work surface available in standard and ESD laminate.
Solid maple or stainless steel worksurfaces are also available |
 |
 |
| Customize as a Complete Work Center |
 |
|
|
MTS I and II upright sets (work surface mounted
version only) and all MTS accessories |
| |
|
Workmaster™ Instrument shelves and accessories |
| |
|
TE2 electrical channels |
| |
|
Lower metal shelves |
| |
|
Backsplash and End Stops |
| |
|
Modesty Panels |
| |
|
End Panels |
|
ESD ground block and personal ground kit |
|
