0
Call Now Contact

Electrical Options

Workstations

Visit Series

Dimension 4 Ergonomic Workstation

PDS-II in Uprights

Our PDS-II (Power Distribution System-II) provides four separate 20 amp circuits interconnected between each workstation upright. This allows any station to access one, two, or all three circuits.

More Information»

SES in Uprights

Our SES (Standard Electrical System) provides a single 15 amp circuit interconnected between the uprights of one station. SES includes one power cord for each station. 48" uprights include a total of four outlets. 60", 72" and 84" uprights include up to eight outlets.

More Information»

Electrical Channels

Electrical Channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8 ft. power cord. UL Listed. 20 Amp units require NEMA 20 Amp receptacles to accept plug. Will not plug into PDS/SES uprights.

LED & Fluorescent Lighting Fixtures

LED tubes produce light equivalent to 40W fluorescents, while consuming 56% LESS electricity. Fluorescent fixtures are designed for high efficiency T8 tubes. Prismatic Diffuser, Direct Overhead Light (DOL), and Parabolic Diffuser (PD) models are available.

More Information»

Under Shelf Lighting

Mounts easily under shelves or flipper door cabinets to provide additional illumination.

L.E.D. Call Lights

Excellent for quick and easy visual communication.


Visit Series

LD-4 Open Lab Stations

SES-L in Uprights

Our SES (Standard Electrical System) provides a single 15 amp circuit interconnected between the uprights of one station. SES includes one power cord for each station. 48" uprights include a total of four outlets. 60", 72" and 84" uprights include up to eight outlets.

More Information»

Electrical Channels

Electrical Channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8 ft. power cord. UL Listed. 20 Amp units require NEMA 20 Amp receptacles to accept plug. Will not plug into PDS/SES uprights.


Visit Series: Standard Heavy Duty

Pro Adjustable Height Workstation

Electrical Channel

TE-2 Electrical Channels include: 15 amp breaker, 8 ft. molded power cord, mounting hardware and eight outlets. Mounts on top of the worksurface. 20 Amp upgrade kit available.


Visit Series

LAN Station Workstation

PDS-II in Uprights

Our PDS-II (Power Distribution System-II) provides four separate 20 amp circuits interconnected between each workstation upright. This allows any station to access one, two, or all three circuits.

More Information»

SES in Uprights

Our SES (Standard Electrical System) provides a single 15 amp circuit interconnected between the uprights of one station. SES includes one power cord for each station. 48" uprights include a total of four outlets. 60", 72" and 84" uprights include up to eight outlets.

More Information»

Electrical Channels

Electrical Channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8 ft. power cord. UL Listed. 20 Amp units require NEMA 20 Amp receptacles to accept plug. Will not plug into PDS/SES uprights.

Shelving Power Channels

The LAN Shelf Electrical Retro-Fit is for adding electrical service to existing LAN shelves. This electrical service is 125 VAC 15 amp rated and includes an 8 ft. grounded power cord and a 15 amp circuit breaker switch combination.

LAN Shelf with Electrical

LAN shelves with electrical outlets conveniently located under the back edge of the shelf body. This electrical service is 125 VAC 15 amp rated and comes with an 8 ft. grounded power cord and 15 amp circuit breaker switch combination. All other shelf specifications apply.

LED & Fluorescent Lighting Fixtures

LED tubes produce light equivalent to 40W fluorescents, while consuming 56% LESS electricity. Fluorescent fixtures are designed for high efficiency T8 tubes. Prismatic Diffuser, Direct Overhead Light (DOL), and Parabolic Diffuser (PD) models are available.

More Information»

Under Shelf Lighting

Mounts easily under shelves or flipper door cabinets to provide additional illumination.


Visit Series

Kinatechnics™ System 1 Workstations

Electrical Channels

UL Listed.

Double- and Single-Sided Workstation Lights

Includes mounting brackets and posts.

Under Shelf Lights

Mounts easily under shelves to provide additional illumination.

Benches & Tables

Workmaster™

Electrical Channels

15 amp breaker, 8 ft. molded power cord, mounting hardware and eight outlets. The TE-1 mounts beneath the worksurface. The TE-2 mounts to the top of the worksurface.

Packaging Stations

Visit Series

Packaging Stations

Electrical Channels

  • Four (4) 15-amp, 60-Hz duplexes
  • Mounts anywhere along Channel Upright Assembly
  • Includes 15-amp circuit breaker and 8-ft. molded power cord
  • ETL Approved

Shelving/Accessories

Visit Series

Workmaster™ Instrument Shelves

SE1 Under Shelf Electrical Upgrade

  • 4 Duplex Outlets
  • 15 Amps
  • Channel can be positioned at the front or the rear of the shelf

SE2 Shelf Riser Electrical Upgrade

  • 4 Duplex Outlets 2 in each riser
  • 15 Amps

SE3 Combination Shelf Electrical Upgrade

  • 8 Duplex Outlets 2 in each riser 4 in under shelf channel
  • 15 Amps

SE4 Inside Riser Panel Electrical Upgrade

  • Outlets and Controls Mounted on Inside Riser Panel
  • Multiple Outlet Options
  • Right-, Left-, or Both-Panel Installations

Under Shelf Lighting

Good lighting is essential for productive work areas. These lights mount beneath the Instrument Shelf to keep the worksurface well illuminated. All units are supplied with an 8 ft. power cord and switch.


Visit Series

Multi Task System I

Electrical Channels

The MTS Electrical Channel is mounted to 14 gauge brackets and can be positioned where electrical access is needed: at the work surface; above or below shelves for test equipment, etc.; or anywhere along the verticals. The electrical channel comes with an On/Off rocker switch, 15 amp circuit breaker, 8 ft. molded power cord, and six or eight outlets.

Deluxe Lighting Fixtures

MTS Deluxe Lighting is a full length accessory and comes in 48", 60", 72", 96" lengths. Deluxe fixtures are UL Listed and include an electronic ballast which operates cooler and more efficiently (lowering air conditioning costs). They are 10% more efficient than magnetic ballasts and 15%-20% more efficient than standard electromagnetic ballasts. They also operate above 20,000 Hz to reduce 60 cycle hum and flicker.

More Information»

LT Light Fixture

MTS LT style light fixtures are UL Listed and include an 8 ft. power cord with a wired in on/off switch.

More Information»


Visit Series

Multi Task System II

Electrical Channels

The MTS System II Electrical Channel is mounted to 14 gauge brackets and can be positioned where electrical access is needed: at the work surface; above or below shelves for test equipment, etc.; or anywhere along the verticals. The electrical channel comes with an On/Off rocker switch, 15 amp circuit breaker, 8 ft. molded power cord, and eight or ten outlets.

Deluxe Lighting Fixtures

MTS Deluxe Lighting is a full length accessory and comes in 48", 60", 72", 96" lengths. Deluxe fixtures are UL Listed and include an electronic ballast which operates cooler and more efficiently (lowering air conditioning costs). They are 10% more efficient than magnetic ballasts and 15%-20% more efficient than standard electromagnetic ballasts. They also operate above 20,000 Hz to reduce 60 cycle hum and flicker.

More Information»

LT Light Fixtures

MTS LT style light fixtures are UL Listed and include an 8 ft. power cord with a wired in on/off switch.

More Information»


Visit Series

Clip Rack System (for Dimension 4)

Electrical Channel

The electrical channel is mounted to 14 gauge brackets and can be positioned where electrical access is needed: near the worksurface; above or below shelves, for test equipment; or anywhere along the clip rack frame. The electrical channel includes an on/off rocker switch, 15-amp circuit breaker, 8 ft. molded power cord, and four, six or eight outlets. Wired for 15 amp 110 volt AC, the electrical channel is ETL approved (Intertek Testing Services).


Visit Series

EZE Reach Posts

Overhead Task Lighting

Providing bright overhead lighting, this light fixture features an easily accessible on/off switch located on the 8-ft. power cord. The prismatic diffuser offers the widest angle of light diffusion. Accepts two (2) energy-efficient fluorescent tubes (not included). Zinc-plated mounting brackets position the fixture either 11-1/4" or 19-1/4" from rear of worksurface (to center of light fixture; fixture is 11-1/2" deep).

More Information»

Storage/Carts

Visit Series

MTS Rolling Carts

Electrical Channels

The MTS Electrical Channel is mounted to 14 gauge brackets and can be positioned where electrical access is needed, anywhere along the vertical uprights. The electrical channel comes with an On/Off rocker switch, 15 amp circuit breaker, 8 ft. molded power cord, and six or eight outlets.


Visit Series

Dimension 4 Accessory Stations

Electrical Channels

Electrical Channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8 ft. power cord. UL Listed. 20 Amp units require NEMA 20 Amp receptacles to accept plug. Will not plug into PDS/SES uprights.

Fluorescent Lighting Fixtures

LED tubes produce light equivalent to 40W fluorescents, while consuming 56% LESS electricity. Fluorescent fixtures are designed for high efficiency T8 tubes. Prismatic Diffuser, Direct Overhead Light (DOL), and Parabolic Diffuser (PD) models are available.

More Information»


Visit Series

Smart Mobile Stations

Electrical Channel

  • Integrated into upright
  • 10 electrical outlets
  • 8 outlets (S6 & P6)
  • Power switch on the bottom, back of cart
  • 8 foot electrical cord

Premium Battery Pack

  • Maximum draw - 750 watts
  • Battery recharges automatically when plugged into wall outlet
  • Digital usage readout on front of battery enclosure
  • Low Power Alarm warns of need for charging
  • Enclosure well ventilated cooling

LED Lighting Fixtures

Available with Prismatic, Direct Overhead Light (DOL) or Parabolic diffusers. Mounts to the top of the upright and plugs into top upright outlet.

  • LED tubes produce light equivalent to 40W fluorescents, while consuming 56% LESS electricity
  • Require NO ballast or starter
  • UL listed and CE approved.
  • Tubes are toxin-free.

More Information»