0
Call Now Contact

IAC Worksurfaces

Strong and durable. That sums up IAC worksurfaces that receive the same attention to quality as our overall workbench construction. Several options are available to suit your specific requirements.

Standard Laminates:

  • Laminated over 1-3/16”-thick industrial grade particle board.
  • Laminates used are high-pressure, postforming horizontal grade, and provide exceptional chemical, abrasion and impact resistance.
  • Worksurfaces are pre-drilled for mounting and adding options, and use metal threaded inserts for ease of installation and durability.
  • Laminated worksurfaces include a 180 degree, rolled front edge for comfort.

Available Colors»

Electro-Static Discharge (ESD) Laminates:

  • All worksurfaces tested for resistivity.
  • Surface to ground testing R (ohms): 1x106 minimum; 1x 109 maximum.
  • Surface to surface testing R (ohms): 1x106 minimum; 1x 109 maximum.

Available Colors»

Standard and ESD laminate worksurfaces are available within these series:

Dimension 4 Series»
Workmaster™ 4-Leg Series»
Workmaster™ 1-Pedestal Series»
Workmaster™ 2-Pedestal Series»
Workmaster™ Storage Cabinet Series»
Pro Series»
Pro Series – Heavy Duty»
LAN Stations»
Packaging Stations»
Kinetechnics Series»


Stainless Steel:

  • High temperature and impact resistant.
  • Steel covers surface and edges of our 1-13/16”-thick industrial grade particle board
  • 16 Gauge (0.060”)
  • 304-2B SS
  • Welded seams and polished finish.

Available within these series:

Workmaster™ 4-Leg Series»
Workmaster™ 1-Pedestal Series»
Workmaster™ 2-Pedestal Series»
Workmaster™ Storage Cabinet Series»


Maple Block:

Beautiful, yet a very strong and durable, Maple block is more impact resistant than laminates, and provides that little bit of “give” to protect metal parts from deformation when moved around on the bench.

Available within these series:

Workmaster™ 4-Leg Series»
Workmaster™ 1-Pedestal Series»
Workmaster™ 2-Pedestal Series»
Workmaster™ Storage Cabinet Series»
Packaging Stations


Laboratory Surfaces:

The chemicals used in these environments demand special worksurfaces, and IAC is ready to supply the surface you want. We commonly provide the following worksurface for lab use:

  • Chemsurf® – Chemical Resistant Plastic Laminate
  • Butcher Block – Hardwood/Maple
  • Trespa® – Phenolic Resin
  • Epoxy Resin
  • Stainless Steel
  • Plastic Laminate

Available within these series:

LD-4 Open Environment Labstations»
Eclipse™ Casework»


Sealed Laminate Worksurface:

For cleanrooms and other high-purity environments, these worksurface are completely covered (top, bottom and sides) with are high-pressure, postforming horizontal grade laminate.

Color: White

Available within these series:

5000 Series»
Isles Airclean Laminar Flow Series»

Prop 65 Notice

ALL PARTICLE BOARD USED IN IAC INDUSTRIES PRODUCTS ARE SOURCED ONLY FROM VENDORS THAT ARE CARB ATCM PHASE 2 AND TSCA TITLE VI COMPLIANT WITH VALID CERTIFICATES. Drilling, Sawing, Sanding or Machining Wood products can expose you to wood dust, a substance known to the state of California to cause cancer. Avoid inhaling dust generated from wood products or use a dust mask to other safeguards for personal protection. This product can expose you to chemicals, including formaldehyde, which is known to the state of California to cause cancer, and methanol, which is known to the state of California to cause birth defects or other reproductive harm. For more information please visit, www.P65WARNINGS.CA.GOV/WOOD. COPY OF VENDOR CERTIFICATE AVAILABLE UPON REQUEST