1-800-989-1422
0
Sign In
Home : Get Started » Laminate Options

Laminate Options

This page displays the complete selection of laminate type and color options available from IAC. Each Series of products, however, may offer only a subset of these laminates. The laminate type and colors available for a specific series is accessed by selecting the the Laminate Selection button within the online product pages for that series.

Due to monitor and printer color discrepancies, some color swatches represented here may not accurately match true laminate color and texture. Please consult with an IAC representative to see actual laminate samples if color is critical.

Standard Worksurface Laminates

  • IAC uses only high pressure postforming horizontal grade laminates.
  • All laminates are chemical resistant and complay with federal specifications governing impact, abrasion and chemical resistance (FED Spec-L-P-508H).
  • Chemical resistant and Laboratory Grade Laminates are available, please consult the factory.
36
Almond
22
Black 22
STD Laminate
06
Dove Gray 06
STD Laminate
16
Gray Matrix
01
LoGlare White
18
Winter Gray Matrix

ESD Worksurface Laminates

Note: Due to changes with the OEM (Original Equipment Manufacturer) manufacturing process of ESD laminate, slight color variations may occur in laminates manufactured in 2015 and after as compared to ESD laminate manufactured prior to 2015. Please consult your IAC representative for review and questions.

  • Resistant measurements are used to establish the charge draining capacity of dissipative hard laminate.
  • All worksurfaces are tested for resistivity
  • Surface to ground testing R (ohms): 1x106 minimum 1x109 maximum.
  • Surface to surface testing R (ohms): 1x106 minimum 1x109 maximum.
09
Gray ESD
15
Nevamar Almond
12
Nevamar Beige
13
Nevamar Gray
14
Nevamar White
10
White ESD

Trim & Accent Laminates

Trim and Accent color laminate must be specified when ordering Dimension 4 uprights, Pro Series, rolling carts, MAS and SAS, and Airclean Workstations.

30
Appollo Blue
Lam Trim
31
Charcoal Gray
Lam Trim
29
Wineberry
Lam Trim

Standard Worksurface Laminates

  • IAC uses only high pressure postforming horizontal grade laminates.
  • All laminates are chemical resistant and comply with federal specifications governing impact, abrasion and chemical resistance (FED Spec-L-P-508H).
  • Chemical resistant and Laboratory Grade Laminates are available, please consult the factory.
36
Almond
22
Black 22
STD Laminate
06
Dove Gray 06
STD Laminate
16
Gray Matrix
01
LoGlare White
18
Winter Gray Matrix

ESD Worksurface Laminates

Note: Due to changes with the OEM (Original Equipment Manufacturer) manufacturing process of ESD laminate, slight color variations may occur in laminates manufactured in 2015 and after as compared to ESD laminate manufactured prior to 2015. Please consult your IAC representative for review and questions.

  • Resistant measurements are used to establish the charge draining capacity of dissipative hard laminate.
  • All worksurfaces are tested for resistivity
  • Surface to ground testing R (ohms): 1x106 minimum 1x109 maximum.
  • Surface to surface testing R (ohms): 1x106 minimum 1x109 maximum.
09
Gray ESD
15
Nevamar Almond
12
Nevamar Beige
13
Nevamar Gray
14
Nevamar White
10
White ESD

Standard Worksurface Laminates

  • IAC uses only high pressure postforming horizontal grade laminates.
  • All laminates are chemical resistant and comply with federal specifications governing impact, abrasion and chemical resistance (FED Spec-L-P-508H).
  • Chemical resistant and Laboratory Grade Laminates are available, please consult the factory.
36
Almond
22
Black 22
STD Laminate
06
Dove Gray 06
STD Laminate
16
Gray Matrix
01
LoGlare White
18
Winter Gray Matrix

ESD Worksurface Laminates

Note: Due to changes with the OEM (Original Equipment Manufacturer) manufacturing process of ESD laminate, slight color variations may occur in laminates manufactured in 2015 and after as compared to ESD laminate manufactured prior to 2015. Please consult your IAC representative for review and questions.

  • Resistant measurements are used to establish the charge draining capacity of dissipative hard laminate.
  • All worksurfaces are tested for resistivity
  • Surface to ground testing R (ohms): 1x106 minimum 1x109 maximum.
  • Surface to surface testing R (ohms): 1x106 minimum 1x109 maximum.
30
Appollo Blue
Lam Trim
31
Charcoal Gray
Lam Trim
29
Wineberry
Lam Trim

Get Started

Begin Building

Electrical Options

Color Options

Need to Know

Dealer Inquiries

Workstation Specifications:

  • All worksurfaces are laminated over 1-3/16" industrial grade particle board.
  • Worksurfaces, when laminated, are impact resistant.
  • Worksurfaces have pre-drilled metal inserts for ease of assembly.
  • All worksurfaces include 180 degree rolled front edge.
  • All ESD worksurfaces include an ESD grounding kit.

Notes:

  1. The first two groups of laminates are for worksurface applications.
  2. The third group of laminates is used for accent color on those workstations that feature this option.

Share This Page

Resources

Quick Ship

IAC, a Division of Treston

3831 S. Bullard Avenue
Goodyear, AZ 85338

  • Call: (714) 990-8997
  • Fax: (714) 990-0557
  • Sales_IAC@treston.com
©2024, IAC, a Division of Treston. All rights reserved.